Baja Butt Welding Pipe Fittings 45 Derajat Siku
45 Derajat Siku
Bahan: Baja Karbon, Baja Tahan Karat, Baja Paduan
Teknis: Dipalsukan lan nyurung
Sambungan: Welding
Standar: ANSI, ASME, AP15L, DIN, JIS, BS, GB
Tipe: 45 ° lan 90 ° LR / SR Siku, Reducer, Tee, Bends, Cap, Cross.
Tembok Tembok: SCH5-SCH160 XS XXS STD
lumahing: Paint ireng / lenga anti karat / Galvanized dicelup panas
Sudut: 30/45/60/90/180°
Ukuran: 1/2"-80"/DN15-DN2000
Sertifikat: ISO -9001:2000, API, CCS
Aplikasi: Industri Kimia, Industri Petroleum, Industri Konstruksi lan Liyane
Inspeksi: Priksa Pabrik In-House utawa Inspeksi Pihak Katelu
Packing: Plywood Pallets/Kasus Kayu Utawa Per Specification Panjenengan
Elbow minangka fitting pipa sing ngganti arah pipa ing sistem pipa.Miturut sudut, ana telung elbows sing paling umum digunakake: 45 ° lan 90 ° 180 °, lan elbows sudut abnormal liyane kayata 60 ° uga kalebu miturut kabutuhan proyek.Bahan siku kalebu wesi tuang, baja tahan karat, baja paduan, wesi tuang, baja karbon, logam non-ferrous lan plastik.Cara sambungan karo pipa kalebu: welding langsung (cara sing paling umum digunakake) sambungan flange, sambungan panas-leleh, sambungan fusi listrik, sambungan Utas lan sambungan soket.Miturut proses produksi, bisa dipérang dadi: welding sikut, stamping sikut, push sikut, casting sikut, etc jeneng liyane: 90 derajat sikut, sudhut tengen bend, katresnan bend, etc.
ASME B16.9, B16.28
| Ukuran Pipa | Kabeh Fittings | 90 & 45 Siku lan Kaos | Reducer lan Lap Joint Stub ends | Caps | |||||||
|
| Diameter njaba ing Bevel, D (1) | Diameter ing mburi (1) | Ketebalan Tembok t | Dimensi Tengah-kanggo-Pungkasan A, B, C, M | Sakabèhé Length, F, H |
| |||||
|
|
|
|
|
|
| Panjang Umum, E | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0.06 | +1.6 | ± 0,03 | ± 0,8 | Ora Kurang Saka 87,5% Kekandelan Nominal | ± 0,06 | ±2 | ± 0,06 | ±2 | ± 0,12 | ±3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ± 0,06 | ± 1.6 | ± 0,06 | ± 1.6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 ~ 8 | +0.09 | +2.4 |
|
|
|
|
|
|
| ± 0,25 | ±6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0.16 | +4.0 | ± 0,12 | ± 3.2 |
| ± 0,09 |
| ± 0,09 |
|
|
|
|
| -0.12 | -3.2 |
|
|
|
|
|
|
|
|
|
| 20 ~ 24 | +0.25 -0.19 | +6,4 -4,8 | ± 0,19 | ± 4.8 |
|
|
|
|
|
|
|
| 26 ~ 30 |
|
|
|
|
| ± 0,12 | ±3 | ± 0,19 | ±5 | ± 0,38 | ± 10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32 ~ 48 |
|
|
|
|
| ± 0,19 | ±5 |
|
|
| |
| Ukuran Pipa | Ujung Rintisan Sambungan Lap (2) | 180 Mbalik Mbalik | ||||||||||
|
| Diameter njaba Lap, G | Ketebalan Lap | Radius Fillet saka Lap, R | Ukuran Pusat-kanggo-Pusat, O | bali menyang- Ukuran Wajah, K | Alignment saka Pungkasan, U | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0 -0.03 | +0 -1 | +0.06 -0 | +1.6 -0 | +0 -0.03 | +0 -1 | ± 0,25 | ±6 | ± 0,25 | ±6 | ± 0,03 | ± 1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| +0 -0.06 | +0 -2 |
|
|
|
|
|
|
| 5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0 -0.06 | +0 -2 | +0.12 -0 | +3.2 -0 |
|
| ± 0,38 | ± 10 |
|
| ± 0,06 | ±2 |
| 20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
| |
| Ukuran Pipa | Off Angle, Q | Off Plane, P | ||
|
| IN | MM | IN | MM |
| ½ ~ 4 | ± 0,03 | ± 1 | ± 0,06 | ± 2 |
| 5 ~ 8 | ± 0,06 | ± 2 | ± 0,12 | ± 4 |
| 10 ~ 12 | ± 0,09 | ± 0,19 | ± 5 | |
| 14 ~ 16 | ± 3 | ± 0,25 | ± 6 | |
| 18 ~ 24 | ± 0,12 | ± 4 | ± 0,38 | ± 10 |
| 26 ~ 30 | ± 0,19 | ± 5 | ||
| 32 ~ 42 | ± 0,50 | ± 13 | ||
| 44 ~ 48 | ± 0,75 | ± 19 | ||
Cathetan:
Out-of-round minangka jumlah saka nilai absolut saka toleransi plus lan minus.
Dhiameter laras njaba deleng tabel ing kaca 15.
